Premium Hanging Door Organizer - Closet Storage Bag with 20 Large Mesh Pockets, Ideal Holder for Home Organization Needs

Our Hanging Door Organizer is crafted from premium-grade polyester felt (non-woven felt fabric), a material engineered for long-term, high-frequency use. Unlike woven fabrics that fray at cut edges, polyester felt is self-finished, meaning it will not unravel, pill, or deform even after years of daily loading and unloading. The felt panels are reinforced with precision stitching at every pocket seam, and the eyelets are made of corrosion-resistant metal hardware to ensure the hanging rope attachment point remains secure. For high-turnover retail or closet environments, this material outperforms linen, canvas, and thin PP non-woven alternatives. If you are sourcing closet storage bags at wholesale volume and need consistent material quality across thousands of units, contact us for a free product sample.

The standard size is 40 cm (W) × 50 cm (H) / 15.7 in × 19.6 in, as shown in the product image. This dimension is optimized to fit most standard interior door widths without blocking the door frame, while maximizing usable pocket area. The 20 pockets are arranged in a multi-row layout:

• Top & Middle rows: Slot-style pockets with metal eyelet tabs — ideal for lipstick, pens, small bottles, and rolled accessories
• Center section: Wide horizontal pockets — fits cards, folded scarves, remotes, or stationery
• Lower section: Deep open pockets — accommodates bulkier items such as folded cloths, small pouches, or kids' items

Custom dimensions (width, height, pocket configuration) are available for OEM and private-label orders. Send us your dimension requirements here.

The standard offering includes pink, gray, beige, dark green, and black — all produced from colorfast polyester felt that retains vibrancy through repeated use. Because our felt is dyed at the fiber level (not surface-coated), color consistency across bulk production runs is exceptionally stable, with a color variation tolerance of ΔE ≤ 1.5. For wholesale buyers building branded product lines, Pantone-matched custom colors are available with a minimum order of 500 pieces per color. We provide a physical Pantone swatch confirmation before mass production begins. Request a color swatch or custom color quote →

Yes. All polyester felt used in our hanging organizers meets the following compliance standards: Full test reports are available for inspection upon request. If your retail buyer (e.g., Walmart, Target, Costco, Amazon) requires specific test documentation, we will provide the corresponding lab reports from SGS, Bureau Veritas, or Intertek. Request compliance documents →

This is one of the most critical concerns for bulk importers, and we address it systematically:

1. Raw material batch locking: Each production run uses felt from a single dyeing batch, eliminating inter-batch color drift.
2. IQC (Incoming Quality Control): Every felt roll is inspected for GSM weight, thickness, tensile strength, and colorfastness before cutting.
3. In-line QC: Our production line follows a 3-checkpoint inspection protocol — after cutting, after stitching, and during final assembly.
4. AQL sampling: Final pre-shipment inspection follows AQL 2.5 Level II sampling standards. Third-party pre-shipment inspection (SGS/BV) can be arranged at buyer's request.

For repeat orders, we retain the production BOM (Bill of Materials) so every reorder batch is traceable to the same felt specification. Tell us your quality requirements and we'll tailor an inspection plan →

Absolutely. We offer four branding methods for private-label and OEM buyers:

• Heat Transfer Printing: Full-color logo, photographic quality, sharp edges — best for complex graphics
• Screen Printing: Cost-effective for 1–3 color logos on flat felt panels, ideal for large orders
• Embroidery: Premium tactile finish — highly recommended for upscale retail positioning
• Woven Label / Hang Tag: Brand label sewn into the seam or attached as a hang tag

For the image shown (brand name "Emibele" printed at the top), this is achieved via heat transfer or screen print, which we replicate for OEM customers with their own branding. Minimum order for branding is typically 300 pieces. Submit your logo file for a mockup →

Yes — this is one of our core OEM/ODM capabilities. We can customize:

• Pocket quantity: from 6 to 30+ pockets
• Pocket type: slot pockets, open pockets, zippered pockets, elastic-mouth pockets
• Dimensions: width, height, and pocket depth per your product specification
• Hardware: eyelet type, rope vs. metal hook vs. over-door hook attachment
• Additional features: inner dividers, clear mesh window inserts, reinforced base panel

Our design team provides a technical mockup within 48 hours and a physical sample within 7–10 business days for approval before mass production. Start your custom design request →